AVR 40 Pin Rapid Robot controller board
Sample codes
available.
See Options here
→
This
robotic platform can be used for learning autonomous robotics and can work as a
low cost solution for many kind of robot. This robot can work as a line
follower, obstacle avoider, wall follower, IR remote controlled robot or any
other kind of autonomous robot possible with this hardware. This is a
complete robot kit which contains chassis, power, circuit, programmer computer
interface and needs nothing extra to start in autonomous robotics. All the
software's and sample codes for starting coding in C (WinAVR) is available on the
CD included in the kit.
This Product
Includes
- CD containing all required software's and sample codes
in WINAVR
- AVR Rapid Robot Controller Board
|
Robot
Controller Board Features
- On Board Regulator with
filters and Operating voltage from 6V - 20 V
- 4 LED's selectable
though individual jumpers
- 5 Switches including
reset
- 3 Switches on interrupt
pins
- Power on/off toggle
switch
- Motor on/off toggle
switch
- 16MHz crystal for
maximum speed
- AREF setting
potentiometer
- Onboard LCD connector
compatible to HD44780 LCD Modules
- LCD brightness control
- Frosted Blue Power
Indicator
- 4 DC/2 Stepper motor
driving capability
- PWM pins connected to
motor drivers for speed control of motors
- Full Speed/PWM Speed
control selection jumpers
- 4 ADC/Standard servo
compatible connectors
- All Pins accessible through
male header pins
- Serial Programmer and
PC-MCU serial
link optional
- All required connectors
included.
Optional
items
- LCD Module HD44780
compatible
- AVR Microcontroller
(Selectable between GP2D12 Sensor, ATmega16 and ATMega32)
- PC-MCU link selectable
(Selectable between Serial and USB Port)
- AVR programmer
(Selectable between Serial Port, Parallel Port and USB Port Programmer)
*Serial port programmer does not work properly when LCD is connected. We
recommend Parallel or USB port programmer if you are using LCD.
- Links to the optional
Items
Downloads
